Which home elevator companies in Malaysia offer pit-free and machine-room-free installations?

Which home elevator companies in Malaysia offer pit-free and machine-room-free installations?
Which home elevator companies in Malaysia offer pit-free and machine-room-free installations?
🔊 Listen to this article
0:00

Getting a lift into a finished home is rarely held back by the lift itself. The obstacles are usually structural. Many quotes from a home elevator company Malaysia still assume a pit dug into the ground-floor slab, a separate machine room and generous headroom above the top landing. Few existing terrace houses or bungalows can offer all three.

Each one adds cost and delay. A deep pit can mean breaking finished flooring, requiring structural checks and extra approvals. A machine room uses space that could otherwise be a store or a bathroom. Until the work is done, the stairs remain a daily risk for elderly parents and anyone with limited mobility.

Pit-free and machine-room-less (MRL) home lifts avoid most of this work. The motor sits inside the lift structure, and the floor needs little or no recess. This guide explains what both terms mean in practice, what to ask a home lift company before you sign, and how the elite elevators range compares.

What Pit-Free and MRL Elevators from Elite Elevators Actually Mean?

Both terms are used loosely in marketing, so it helps to know what each one covers in practice.

MRL elevators are machine-room-less lifts. In a traditional traction lift, the motor, gearbox and controller sit in a separate room, usually above the shaft. An MRL design places a compact motor inside the shaft or lift frame and fits the controls nearby. For a home, this design frees up a room’s worth of space and removes the need for building work above the top floor.

The drive type decides how the result is achieved. A gearless belt drive, as used in the elite elevators X400 range, is small enough to sit within the lift structure. Because there is no gearbox, it also runs quietly and needs no oil. Some compact hydraulic systems, such as the Elite Elevators E200, are also built so that no machine room is required.

Pit-free means the lift does not need a hole dug below the ground-floor level. In reality, the term covers a few cases:

  • True zero pit: The cabin floor sits on the existing slab. The elite elevators, X400, are described as needing no pit at all.
  • Shallow recess: A pit of around 60 mm. This area is a shallow cut into the floor rather than an excavation.
  • Ramp or threshold: Where no recess is possible, a small ramp lets the lift sit directly on the floor. The E200 can work this way.

Any of these avoids the deep pits of commercial-style lifts, which can run well past a metre. When you compare companies, ask which of the three they are actually offering for your floor.

How to Choose a Home Elevator Company Malaysia?

Many suppliers now use the words “pit-free” and “MRL” on their websites. Fewer can back them up with figures for your specific home. These questions help separate a specialist home lift company from a general lift contractor.

  1. What is the exact pit depth, with and without a shaft? A good answer gives two numbers in millimetres. A vague “minimal pit” is not enough.
  2. Where does the motor go? If there is no machine room, ask whether the drive is gearless, belt-driven or hydraulic, and where the controller is mounted.
  3. How much headroom does the top floor need? Pit-free lifts still need clear height above the top landing. Get this in writing before you check your ceiling.
  4. Which safety standard is it certified to? EN 81-41 is the European standard written for lifting platforms in homes. EN 81-20 and EN 81-50 cover passenger lift design and testing.
  5. What happens in a power cut? Look for an Automatic Rescue Device that lowers the cabin to the nearest floor, plus emergency calling on battery backup.
  6. Is the shaft self-supporting? A free-standing metal or glass shaft can go inside or outside the home with no load on existing walls.
  7. Can you see one working? A company with experience centres lets you ride the lift and check finishes before you commit.
  8. Who services it afterwards? Remote monitoring and local technicians matter more over ten years than the purchase price.

A company that answers all eight clearly is usually one that designs lifts for homes first, rather than adapting building lifts to fit.

Specifications of Elite Elevators That Match a Reliable Home Lift Company

Elite Elevators offers four home lifts built without a machine room and with no pit or a very shallow one. The table lists the figures from each product page that decide whether a model fits your home.

Model Drive Pit depth Safety standard
X400 Gearless belt No pit EN 81-41
X400 Mark II Gearless belt 59 mm (100 mm with shaft) EN 81-20, EN 81-50
X400 MK II Plus Gearless belt 60 mm (100 mm with shaft) EN 81-20, EN 81-41
E200 Hydraulic, indirect chain About 120 mm (none with ramp) EN 81-41

X400: the gearless option. The X400 runs on a gearless belt drive at up to 1.0 m/s, about twice the speed of an average home lift. It offers four ride modes: Sport, Comfort, Eco and Personalisation. Its cabin reaches 1,500 × 1,500 mm, and greaseless rails remove the need for oiling. The X400 is also connected to the elite elevators support network for remote diagnostics and software updates.

X400 Mark II: smart MRL living. The X400 Mark II keeps the same drive and adds built-in AI that learns which floors your household uses. Fingerprint access and a 21-inch live board display come with it, along with a wide-angle cabin camera. Travel height reaches 21,000 mm, which suits tall villas.

X400 MK II Plus: biometrics and app control. This model adds a mobile app showing cabin position and usage history, plus SOS alerts. Floors can be locked with a PIN or fingerprint. It uses automatic sliding doors from 600 to 900 mm and needs 2,600 mm of headroom.

E200: hydraulic without a machine room. The E200 suits homeowners who prefer hydraulic technology. It runs on single-phase power, drawing about as much as a half-ton air conditioner. It can be installed in two to three weeks and descends safely without power during an outage. Patented Greaseless Rail (GLR) technology keeps the shaft clean.

The elite elevators X200 and X200 Plus are also compact hydraulic options, with a 100 mm pit and 2,300 mm headroom. They suit homes up to four stops where a shallow pit is acceptable.

Frequently Asked Questions

1. What is an MRL elevator for homes?

An MRL elevator is a machine-room-less lift with its motor and controls inside the lift structure, so no separate room is needed. The elite elevators X400 range uses a gearless belt drive that fits within the lift. The E200 hydraulic lift also needs no machine room.

2. Can a home lift be installed without a pit?

Yes. The elite elevators X400 needs no pit. The X400 Mark II needs only 59 mm without a shaft, and the X400 MK II Plus 60 mm. The E200 can sit on the floor with a small ramp or threshold instead of a pit.

3. Are pit-free home lifts safe?

They are when certified to recognised standards. The Elite Elevators X400 is certified to EN 81-41, and the X400 Mark II to EN 81-20 and EN 81-50. Both have five embedded safety layers. On the X400 Mark II, these include dual emergency braking, Live SOS 2.0 and an Automatic Rescue Device for power cuts.

4. How many floors can a machine-room-less home lift serve?

The elite elevators X400 and X400 Mark II serve up to G+5, or six stops. Travel height on the X400 Mark II reaches 21,000 mm. The E200 also serves up to six stops, with travel up to 13,100 mm.

5. Can an MRL lift be installed outside the house?

Yes. The elite elevators X400 Mark II, X400 MK II Plus and E200 are all rated for indoor and outdoor installation. An outdoor shaft avoids cutting through floor slabs, which suits older or fully finished homes.

Author

Sarah Zahra

I'm Sarah Zahra, an Research & Development specialist at Elite Elevators Malaysia, focused on advancing home mobility solutions for modern residences. My work involves researching and refining stair lift and home elevator technologies suited to Malaysian homes. I collaborate with global engineering teams to ensure safety, usability, and long-term reliability. With a background in product development, I translate technical insights into practical solutions for everyday living. I'm passionate about bridging innovation and accessibility to support independent lifestyles. Through writing, I aim to guide homeowners toward informed, future-ready mobility decisions. At Elite Elevators, I'm proud to be part of a mission that's transforming how Malaysians experience comfort at home.